Floor anchor plates1 point attachment
anchor plate to fix to the floor. Comes with 2 bolts ½ ‘’ Technical
specificationsColor: BlackCapacity: 6000 PoundsPlate dimensions: 152
mm X 51 mm X 9.75 mmBolt holes diameter:
15.5 mmAttachment point
diameter: 17.5 mm
2" Ratchet Straps with hooks is ideal to be used on our Pin Rail Concrete Block (PRC01) set-up with the Plastic Corner Strap ProtectorThis versatile ratchet has a 5.1 cm (2 in.) wide web and is 8.2 m (27 ft.) long. The web has a sewn in tag to comply with all DOT requirements.Features..
The Pin Rail is a device that anchors into concrete allowing the user to secure ropes coming from the ceiling to it to secure acrobatic/aerial apparatuses.This Pin Rail is engineered to be used on concrete blocks making it ideal for outside events or non-permanent installations. It is designed for s..
The Pin Rail is a device that anchors into concrete allowing the user to attach ropes coming from the ceiling to it to secure acrobatic/aerial apparatuses.Features: Strong enough to withstand acrobatic charges on up to 3 different points.Pins are fixed to the pinrail, cannot be removed. Ea..
The Pin Rail is a device that anchors into concrete allowing the user to attach ropes coming from the ceiling to it to secure acrobatic/aerial apparatuses.This Pin Rail is an advanced version of our standard model designed for school and professional use. With 4 cleats and additional hardware to rec..
Standard steel anchor for interior uses or non-permanent installationsThe COEUR BOLT STEEL is a standard steel anchor composed of a COEUR STEEL hanger, a bolt and a nut. It is designed for interior uses or non-permanent installations. It is available in 10 and 12 mm diameters.DescriptionEconomical c..
Standard steel hanger for interior uses or non-permanent installationsStandard steel hanger designed for interior uses or non-permanent installations.DescriptionEconomical choice for low-corrosion environmentsEasy clipping:the wide, ergonomic connection hole facilitates carabiner clippingthe width o..
Beam anchor plate*NOTE: The length bolts shipped with your beam will be based on the width of the beam selected from the option. The bolts will measure 1.5 inches more then the length of your beam. If your beam width is not in the options to the right, please round up to the closest length in t..
This Beam Clamp is designed to be rigged on a beam to add an attachment point.Your Beam must be compatible.*Please check the image explaining the distancesWith space in the center: Minimum 1/2inch to max 2-1/2''Height of beam: Min 1-1/2" to max 3-1/2" (Higher beams possible, just request longer bolt..